How Much Does Light Switch Replacement Cost in Perth? (2026 Prices)

Cracked, yellowed, sticky or scorched switches are the most common small job in Perth homes, and the most common "while you're here". The good news is it's a fixed price per switch, not an hourly rate, so you know the total before we start — and a room or a whole house can be done in one visit. This guide covers the 2026 prices for switches and power points, the ranges people choose, what's done, and why the scorched one needs a look today.

• Standard. Clipsal's standard white range — the one in most Perth homes. Cheap, reliable, and the mechs are available everywhere.
• Designer. Clipsal Iconic (slim, with swappable colour skins), Saturn Zen and Saturn Pro (matt and glass finishes), and equivalents from Hager and HPM. The look of a renovated home for $40–$140 more per switch.
• Smart. Clipsal Wiser, Zimi Powermesh and Wi-Fi switches that work with Google, Alexa and Apple Home. The wall switch keeps working for everyone; the app adds schedules and voice control. Some models need a neutral at the switch point, which older homes don't have — we check first.
• Power points. Double GPOs as standard; USB-A/USB-C versions for benches and bedsides; 15 A points for caravans and workshops; weatherproof outdoor points.
• Brands. Clipsal, Hager and HPM are the common ones in Perth homes.

1. Isolate the circuit — and check for the things we find behind old switches: scorched terminals, two-wire lighting with no earth, and DIY joins.
2. Replace the mech and plate, terminate properly, and fit the plate square (it's the detail people notice).
3. Power points: the same, plus an earth check and polarity test at every point.
4. New positions: a cable run from the nearest suitable circuit through the cavity or roof space, a new mounting bracket, and patching left ready for paint on solid walls.
5. Test and certify. Every switch and point tested; your Electrical Safety Certificate follows.

A single switch takes about 20 minutes on site; a whole 3×1 house — say 25 switches and points — is most of a day.

• Scorch marks, a burning smell or heat. A loose termination arcing behind the plate. Stop using it and call today.
• Sparks when you plug in. A tiny spark is normal on some appliances; a crack and a flash is worn contacts.
• Loose plugs. Worn power points that no longer grip a plug overheat under load — kettles and heaters especially.
• Buzzing dimmers. Usually the wrong dimmer for LEDs; see the dimmer guide.
• Cracked or yellowed plates. Cosmetic, but cracks expose live parts and children find them.
• Bakelite switches in pre-1970 homes: they still work, but the wiring behind them is the same age.

• Licensed contractor only. Replacing a switch or power point is electrical work for a licensed electrical contractor (our licence is EC15449). It's illegal to DIY in WA, and it's cheap to have done properly.
• RCD protection. New points and altered circuits must be RCD-protected under AS/NZS 3000:2018; two RCDs are required before a home is sold or rented.
• Earthing. Metal plates and fittings need an earth; old two-wire lighting circuits can't provide one, which we'll tell you about before fitting a metal-look plate.
• Outdoor points need IP-rated enclosures.
• Electrical Safety Certificate for the work, within 28 days.

• Quantity. A fixed $160 per standard switch or point, so the total is simply the count.
• Range. Standard, designer or smart.
• New positions — the cable run is the cost, and solid walls need patching.
• What's behind the plate. Scorched cable or a missing earth has to be dealt with.
• Two-way switching and smart modules needing a neutral.

Tell us how many switches and points, the range you'd like, and send a photo of one or two of the worst — that's enough for a fixed price. For a whole-house job we'll count them on a quick visit.

• Fixed price per switch, no hourly rate, $0 call-out fee.
• Whole rooms or homes done in a single visit.
• Every switch and point tested; Electrical Safety Certificate included.
• Licensed electrical contractor EC15449, 300+ five-star Google reviews. See our switches and dimmers and power point installation pages.

We replace switches and points across the Perth metro — Morley, Dianella, Scarborough, Melville, Canning Vale, Ellenbrook and everywhere between.

• Replace the worst first. Scorched, cracked and loose ones now; the rest can wait for another visit.
• Standard plates in cupboards and laundries, designer where you look at them.
• Bundle with a dimmer, a USB point or a sensor light in the same visit.
• Buy the plates yourself if you like — we'll fit any Australian-certified range, though our trade price is usually close to retail.

Switches or power points to replace in Perth?

Call 0422 117 839 or request a free quote online. Fixed price per switch, $0 call-out fee, tested and certified. More on our switches and dimmers page.